TARAK
Light Duty Hydraulic Guillotine Shearing Machine with
FIXED RAKE ANGLE is designed to suit Sheet Metal Industries
using thin Sheets. |
FRAME
: Rigid steel frame of "TARAK" Shears
are optimally designed to avoid weak sections at load
support and is of interlocked design. The table of frame
is welded together with support of steel plates. The table
top surface is machined with provision of t-slot facilitate
front gauge stopper. Ram assembly is welded with steel
plate support. |
ROLLER
GUIDES : The upper beam is guided by three
point roller guides. A replaceable hardened Liner is provided
for minimum wear. It Eliminates lubrication of guides. |
HYDR.
POWER PACK : Hydraulic system is mounted at
top side of machine. Hydraulic components are of internationally
reputed make like Vickers, Dowty, Rexroth etc. Valves
are mounted on a compact manifold block minimizing piping
and chances of leakages. For oil cooling sufficient size
of oil reservoir provided. |
CYLINDERS
: Cylinders are precisely honed and are fitted
with hard chromed piston rod with best quality sealing
elements. Cylinders are connected with upper beam (cutting
beam). |
HYDR
HOLD DOWN : Hydraulic hold down pads hold the
sheet securely to avoid slipping & bowing resulting
in clean square cut. Hold down units are provided for
better clamping while cutting narrow strips. |
STROKE
: The same is adjusted with help of stroke
setting Rod & Limit Switches. |
BLADE
CLEARANCE : Blade clearance can be adjusted
manually by lever on each side of machine with calibration
of clearance suitable for thickness. |
BACK
GAUGE : Hand operated back gauges are provided. |
BLADES
: TARAK shears are provided with high
quality, Single segment (HcHcr) blades for longer tool
life. Ease in assembling of blade reduces down time. The
blades are four edged. |
OPERATION
: The Machine can be operated by Push Button
or by Foot Switch. When foot Switch is pressed Hold Down
Plungers come down & Upper Beam starts Shearing Operation.
If foot Switch released at any point of Shearing, the
Upper Beam will return back from that point. |
FINGER
GUARD : Fitted in front of hold down for operator's
protection without obstructing viewing. |
OPTIONAL
ACCESSORIES : * MOTORISED BACK GAUGE WITH DRO
* ELECTRONIC STROKE COUNTER * N.C. BACK GAUGE * BALL TRANSFERS
* EXTENSION SQUARING ARM * REAR SHEET SUPPORTER * FOUNDATION
BOLTS * AUTOMATIC LUBRICATION |