TARAK
Press Brakes are designed and developed through years of experience
in sheet metal working machines TARAK press Brakes are
widely accepted in industries for continuous production runs
and in areas requiring accuracy and repeatability coupled with
high production. |
1.
Frame : Frame is of robust steel construction of rigid
and interlocked design. It is strain-free and supports the
ram and bed against undesired deflection under permissible
load condition.
|
2.
Ram and bed : Made from steel plates of suitable thickness.
Machined for straightness and parallelism of the working surface.
Ram is guided and supported throughout the stroke by accurately
machined guide ways. |
3.
Drive System : Power is transmitted to the ram through two
individual gears drives for uniform load distribution throughout
the length. This also reduce the torsional stresses on the eccentric
shaft. Electric motor used is of sufficient H.P. Which reduces
slowdown of flywheel and increases energy available per stroke.
The gear and pinion are made out of carbon/alloy steel. |
4.
Ram Adjustment : Motorized ram adjustment through a simple
drive mechanism, facilities quick bending angle adjustment Angular
ram adjustment is made simple by incorporating a spring loaded
dog clutch. |
5.
Clutch and Brake : All series of press brakes are provided
with high - torque low - inertia friction clutch, synchronized
with heavy duty mechanical brakes ensuring immediate braking
o from on releasing the pedal. Clutch operating leavers are
designed in such a way that minimum, engaging force is required
at the pedal. |
Special
features : Connection link mounted on crank shaft for uniform
load, separate Drive system for each connection link. Sufficient
H.P. Normal torque motors provided. Boltless pedal mounted on
hexagonal bar. General purpose V-Block and punch supplied as
standard accessories. |
Standard
Accessories : Standard V-block and Punch, Back Gauge, Motor
pulley, Motor Mounting Bracket, Pedal, Flywheel & Gear Guards,
Stroke Counter, manual Lubrication & instruction Manual. |
Optional
Accessories : Automatic Lubrication System, Goose Neck Punch
& other toolings (Drawing required), Electrical consist
of Electric Motor, Wiring, Control Panel, V-belt, Push Button
Pendent, (For model WP-O Electric Motor, V-belt, Main switch
and Reversible Switch). |
Note
: WP-o is Single geared type Machine. Electrical are not
under warranty.
|